Tuya Carbon Monoxide Detector with Smart ZigBee Siren

Tuya Carbon Monoxide (CO) Detector Smart ZigBee with Sound Warning

Do you want to protect your home from gas leaks? In that case, we have a Zigbee smart gas sensor

ready for you. You will be informed immediately of the increase in gas concentration,

thanks to which you will have time to react appropriately.

For its ideal connection to your smart home, it requires a ZIGBEE HUB (ZigBee 3.0 protocol).

Carbon monoxide (CO ), commonly nicknamed the silent killer, is a colorless, odorless, highly toxic gas,

slightly lighter than air (carbon monoxide weighing 1 mole = 28 g is slightly lighter than air,

the molar mass of air at 0 ° C is 28 Carbon monoxide (CO) is produced by the incomplete combustion of various fuels,

including coal, wood, coal, petroleum, kerosene, propane, or natural gas.

The Zigbee carbon monoxide sensor is ideal for detecting carbon monoxide (CO) leaks from all

household gas appliances and gas boilers. The device is powered by the 230V mains.

Intelligent carbon monoxide detector , new generation of home products for a safe life, which

combines the latest technology and innovative design.

The detector is aesthetic, effective and will certainly contribute to increasing the security of your home.

Thanks to its very high sensitivity, it is possible to detect the presence of carbon monoxide in the initial phase of the spill,

thus preventing poisoning. Carbon monoxide is an invisible killer, an odorless gas that is dangerous not only for humans but also for animals.

A built-in loud siren (75dB volume), a flashing LED and a notification within the mobile application

smart phone directly on the mobile phone will alert you of the presence of this gas.

Create Scenes for your Safety

Possibility to set the action after the sensor alarm and to connect it with other devices, for example:

When the gas concentration is exceeded, the output relay closes and signals the siren and disconnects the

main gas connection to the house, apartment, etc. via a connected TUYA MANIPULATOR .

Built-in alarm siren

The loud siren (> 75 dB) built around the sensor as a sign of a dangerous situation.

When the gas detector is activated, it will alarm with the built-in siren.

Everything under control Through the App

The user will be informed of the gas leak via a smart application directly on the mobile phone.

The Tuyasmart or Smartlife smart mobile application allows you to control and

manage your home from anywhere in the world only with the help of the Internet and your mobile phone.

In addition to the usual functions, this device excels with completely new functions :

Test function : The device is equipped with a test function, which serves to artificially simulate the presence of

gas and allows the operation of internal circuits to be checked through an automatic efficiency monitoring system.

BASIC RULES FOR THE INSTALLATION OF THE CO DETECTOR

CO detectors should be installed in or near bedrooms and living rooms.

It is recommended to install CO detectors on every floor of the house. When deciding where to install detectors, keep in mind

that it is necessary to listen to the detectors from all parts of the house used for sleeping.

If only one detector is installed, place it near the bedrooms and not in the basement or boiler room.

Where not to place the detectors !!

IMPORTANT: Improper placement can adversely affect the sensitive electronic components in this detector.

To avoid equipment damage, ensure optimal operation and avoid unnecessary false alarms:

• Do not place in kitchens, garages or boiler rooms where the sensor could come into contact with substances that could destroy or contaminate it.
• Do not place in environments with temperatures below 5 ° C or above 40 ° C, such as low rooms, attics, verandas and garages.
• Do not place within 2 meters of heating or cooking appliances.
• Do not place near ventilation openings, flues, chimneys or air vents.
• Do not place near ceiling fans, doors, windows or areas directly exposed to the elements.
• Do not place in areas with still air, such as the tops of vaulted ceilings or gable roofs, where CO may not reach the sensor fast enough for an early warning.
• Do not place this device near large batteries. Large batteries have emissions that can reduce the detector's operational capacity.
• Leave the ventilation holes located on the detector free. Do not place the detectors where curtains, furniture or other objects could block the free flow of air in the vents.

Also, do not place the CO detector:

• Towards a window or door where air currents will affect the detector, such as exhaust or ventilation.
• In a wet or very humid area, such as a bathroom.
• Places where curtains or furniture prevent the flow of air around the detector.
• In places where dirt or dust can clog the sensor and prevent it from working.
• In places where the device could be overturned, damaged or removed.
• Do not paint the device and avoid clogging the carbon monoxide inlets with dirt, grease or other substances.

Functions and Features :

• Carbon monoxide (CO) leak detection
• Loud alarm 75 dB
• A ZIGBEE HUB must be purchased for gas sensor operation
• Free mobile application for iOS and Android devices
• When you detect gas, you receive a notification directly on your mobile using the application
• Control from anywhere the internet is available
• It has alarm, automation and intelligent scenarios
• No cost of use
• Modern design