Tuya RF433 Wireless Water Level Measurement Kit with Display and Socket

Tuya RF433 Wireless Water Level Measurement Kit with Monitor and Automatic Socket

Make water level management simple and reliable with the Tuya RF433 Wireless Water Level Measurement Kit

with Display and Smart Socket . With a built-in display screen, the sensor can show data in time

real liquid level, making it easy for users to monitor and control the level. When the water level

reaches the set minimum or maximum level , the included socket can be used to control a water pump .

Designed for industries such as housing , manufacturing, agriculture and water treatment, this advanced kit uses

ultrasonic technology to provide precise monitoring and control of liquid levels in tanks.

Precise Ultrasonic Measurement

Tuya ultrasonic liquid level controller uses ultrasonic pulses to accurately calculate the level

of the liquid, ensuring reliable data on the Monitor and automatic control of the water pump, thanks to the included socket.

RF433 Wireless Communication

The ultrasonic sensor and digital monitor communicate via RF433MHz , offering a communication distance of up to

100 meters in open spaces. This ensures wide and stable signal coverage.

Integrated LCD display

The LCD display shows the tank level , temperature and time in real time. Furthermore, it is connected to the socket ,

which automatically controls the water pump based on set water levels.

High and Low Level Alarms

When the water level reaches the minimum or maximum level , the system beeps and displays

an alarm on the display , automatically activating or deactivating the water pump connected to the socket .

Intelligent Grip Control

The socket must be connected to the Display , and a water pump can be connected to it, which will be turned on or off

automatically from the outlet based on water levels . The pump power must not exceed 3 kW .

Easy Installation

The sensor must be mounted in the center of the tank to avoid incorrect measurements. The hole must be 72 mm .

Follow the instructions to position it correctly and enjoy a reliable and accurate monitoring system .

Simple Operation

When the water level in the tank reaches the set low level alarm level, appears on the display

the low level alarm and the pump starts and starts adding water to the water tank. When the water level

reaches the set high level , a high level alarm appears on the monitor and stops the pump .

With the Tuya RF433 Wireless Water Level Measurement Kit with Display and Socket, you can monitor and control the levels of your

tanks in a simple , precise and reliable way, always guaranteeing the correct functioning of your water management system.

Benefits of the Tuya Smart WiFi Water Level Meter:

• Saves Time and Effort : Avoid physical inspections and manual monitoring of tank levels, saving valuable time.
• Real-Time Monitoring : Receive real-time alerts on the Monitor for immediate and informed management of fluid levels.
• Reliability and Accuracy : Advanced sensors ensure accurate and reliable measurements for informed tank management decisions.

Installation Instructions:

1. Choose the location in which to install the device: the sensor must be mounted on a straight section of the pipe.
2. Clean the pipe surface: Use a clean cloth to wipe the surface of the pipe where you plan to install the sensor, to ensure there is no debris or dirt that could interfere with the sensor's performance.
3. Install the sensor: Fix the sensor on the pipe. Make sure the sensor is installed firmly and securely.
4. Connect the harness: Connect the harness to the appropriate terminals on the sensor. Follow the wiring diagram in the user manual supplied with the device.
5. Turn on the sensor: After connecting the wiring, turn on the power to activate the sensor.
6. Test the sensor: Perform a test to make sure the sensor is working properly. You can test the device by flowing liquid into the tube and observing the sensor output signal.