Tuya Smart WiFi Liquid Level Measurement Kit with Indicator Monitor

Tuya Smart WiFi Water Level Measurement Kit with RF433Mhz Indicator Monitor

The Tuya TLC2326P Liquid Level Measurement Kit is the perfect solution for real-time monitoring of water levels.

water, oil, fuel or other liquids in your tanks, directly from your smartphone. This advanced system

It uses ultrasonic sensors to provide precise and reliable measurement , and is compatible with the Tuya Smart app

or Smart Life , allowing you to monitor and manage your tanks wherever you are. Thanks to the RF433Mhz signal and the

Wi-Fi connection, you can receive notifications in case of critical levels, avoiding overflows or water shortages .

Remote monitoring via app

Easily check your tank levels via the Tuya Smart or Smart Life app and get real-time notifications

real on the state of the liquid. You will no longer have to physically open the tank to check the level.

Intelligent alarm function for critical levels

Set up custom alerts to receive automatic notifications when your tank level is too low or

too high. This allows you to prevent problems such as lack of water or overflow ,

ensuring timely interventions for efficient management.

Long range Wi-Fi and RF433 MHz connection

The system uses a RF433 MHz signal to communicate between the sensor and the monitor , with a range of up to 450 meters in

open spaces. The connection with your smartphone is via Wi-Fi, allowing you to monitor remotely.

Precision at the highest levels

The detection time of ultrasonic water level measurement is greater than or equal to 900ms, and its

accuracy is very high in the detection range, and its measurement error is only 1% reading + 10mm.

Monitoring multiple tanks

You can monitor up to 10 tanks at the same time using a single app. This feature is ideal for those who manage

multiple tanks in residential, agricultural or industrial environments, facilitating centralized control of all liquid resources.

Create Intelligent Scenarios

With this Water Monitoring Kit you can build your own automated filling system. For example

By purchasing a smart plug , you can create a scene that activates the pump when the water level is below 30%.

automatic filling and when the tank is 90% full the smart plug turns off the pump to avoid waste.

Or you could automate it so that the reservoir is never empty, i.e. "I only water the crop with the reservoir if it's

greater than 50% " so as not to run out of water for consumption (among many other possible examples).

Waterproof and weatherproof

The sensor is designed to withstand harsh weather conditions, thanks to the IP67 rating . This makes it

ideal for outdoor use, where humidity , rain and other weather conditions could damage less durable devices.

Easy installation

The Tuya Liquid Level Detector is simple to install and can be set up in minutes. The device

It is also compatible with most standard containers and tanks , making it very easy to use.

The sensor detection height is 0.1 to 2.9 meters. The sensor cable length is 3 meters and the length of the

Power adapter cable is 1.5 meters. The tank hole must be 58mm .

Benefits of Tuya Smart WiFi Water Level Meter:

• Save Time and Effort : Avoid physical inspections and manual monitoring of tank levels, saving valuable time.
• Real Time Monitoring : Get real-time alerts on your smartphone for immediate and informed management of fluid levels.
• Reliability and Accuracy : Advanced sensors ensure accurate and reliable measurements for informed tank management decisions.

Installation Instructions:

1. Choose the location where to install the device: the sensor must be mounted on a straight section of pipe.
2. Clean the Pipe Surface: Use a clean cloth to clean the pipe surface where you intend to install the sensor, to ensure there is no debris or dirt that could interfere with the sensor's performance.
3. Install the sensor: Fix the sensor on the pipe. Make sure the sensor is installed firmly and securely.
4. Connect the Wiring: Connect the wiring to the appropriate terminals on the sensor. Follow the wiring diagram in the user manual provided with your device.
5. Turn on the sensor: After connecting the wiring, turn on the power to activate the sensor.
6. Test the sensor: Perform a test to ensure that the sensor is working properly. You can test the device by running liquid through the tube and observing the sensor output signal.