Tuya Smart WiFi Water Level Measurement Kit with Monitor Indicator and Socket

Tuya Smart Wi-Fi Water Level Measurement Kit with RF433Mhz Monitor and Socket

The Tuya WiFi Water Level Monitoring kit is an intelligent and reliable device capable of detecting water levels in

tanks, providing accurate, real-time information. Thanks to its easy installation and the intuitive interface of the App

Tuya Smart or Smart Life , you can conveniently monitor your tank level anytime , anywhere.

This device is perfect for farmers, homeowners and gardeners who rely on water tanks

for their daily needs . With Tuya's innovative technology , you can ensure that your water supply

is always under control, allowing you to save time , money and resources. Furthermore, users can

use the intelligent socket, included in the Kit , to control the water pump , in order to turn it off

automatically when the tank is full and automatically turn it on to add water when it runs out.

The Smart Ultrasonic Level Detector is a device that anyone can use and install easily .

Application Scenario

Thanks to the dual WiFi and RF433Mh connection, the intelligent level sensor can not only transmit data to the Tuya app

Smart or Smart Life in real time, and set a low level alarm anytime, anywhere but also

check the level situation via Monitor RF433 . Therefore, regardless of where you are, as long as it is there

an Internet connection, the liquid level situation can be monitored and controlled and managed remotely

via the Tuya app and controller . You can create all the scenes in the app to fit everything to your needs to activate the pump.

You will also receive the notifications you want, for example, when it is at 50% , when it is at the critical level of 10%. The comunication

between the sensor and the indicator is done with RF433 Mhz and the distance between them can reach 150 meters in open space.

Principle of operation

The working principle of ultrasonic sensors is to emit high-frequency sound waves that do not

can be perceived by the human ear. Like many other sensors, our tank level sensor

Ultrasonic water uses two probes, where one probe sends a pulse and the other probe receives the echo.

Based on the time elapsed from transmission of the pulse to reception, the distance is calculated .

Precision at the highest levels

The detection time of ultrasonic water level measurement is greater than or equal to 900ms, and its

accuracy is very high in the detection range, and its measurement error is only 1% of reading + 10mm.

Monitoring of multiple tanks

The same phone can be connected to multiple Tuya ultrasonic sensors for simultaneous monitoring .

Create Intelligent Scenarios

Thanks to this Water monitoring kit you can build your own automated filling system. For example with the

smart plug included in the system, you can create a scene that when the water level is less than 30% activates the pump

filling automatically and when the tank is at 90% the Smart Socket turns off the pump to avoid waste.

Or you could automate so that the tank is never empty, i.e. " I water the crop with the tank only if it is

above 50% " so as not to run out of water for consumption (among many other possible examples).

Universal Compatibility

Suitable for use in homes , farms , manufacturing plants , homes and any other

context that requires monitoring of fluid levels .

Easy installation

The Tuya Liquid Level Detector is simple to install and can be set up in minutes. The device

It is also compatible with most standard containers and tanks , making it very easy to use.

The sensor's detection height is 0.1 to 2.9 meters. The length of the sensor cable is 3 meters and the length of the

Power adapter cable is 1.5 meters. The tank hole must be 72 mm .

Benefits of the Tuya Smart WiFi Water Level Meter:

• Saves Time and Effort : Avoid physical inspections and manual monitoring of tank levels, saving valuable time.
• Real-Time Monitoring : Receive real-time alerts on your smartphone for immediate, informed management of fluid levels.
• Reliability and Accuracy : Advanced sensors ensure accurate and reliable measurements for informed tank management decisions.

Installation Instructions:

1. Choose the location in which to install the device: the sensor must be mounted on a straight section of the pipe.
2. Clean the pipe surface: Use a clean cloth to clean the surface of the pipe where you plan to install the sensor, to ensure there is no debris or dirt that could interfere with the sensor's performance.
3. Install the sensor: Fix the sensor on the pipe. Make sure the sensor is installed firmly and securely.
4. Connect the harness: Connect the harness to the appropriate terminals on the sensor. Follow the wiring diagram in the user manual supplied with the device.
5. Turn on the sensor: After connecting the wiring, turn on the power to activate the sensor.
6. Test the sensor: Perform a test to make sure the sensor is working properly. You can test the device by flowing liquid into the tube and observing the sensor output signal.